The Ecofriendly energy saving soft flow fabric dyeing machine is mainly used in the special form of rope dyeing machine, which can be divided into two categories: high temperature and high pressure type and normal temperature and normal pressure type according to different process conditions during dyeing. . The machine is easy to operate and easy to use. Because the dyeing liquid forms a flow of water through the liquid flow port during dyeing to transport the fabric, the fabric is in a relaxed state, the tension is small, the dyed fabric is soft, the color is uniform, and the color is soft. , can effectively eliminate the rickets caused by wrinkles.
The Ecofriendly energy saving soft flow fabric dyeing machine has a high degree of automation. The dyeing liquid circulation pump requires a large flow rate, and the head is not required to be too high. When dyeing with an overflow dyeing machine during operation, the dyeing liquid is dyed. The bottom end of the grooved plate is taken out by a centrifugal pump, sent to a heat exchanger for heating, and then enters the overflow tank from the top. Two overflow pipes are installed in parallel in the overflow tank. When the dye liquor fills the overflow tank, the dyeing liquid overflows into the overflow pipe to drive the fabric into the dye tank due to the difference of the upper and lower liquid levels between the dyeing tank and the dyeing tank. This reciprocating cycle achieves the purpose of dyeing.
The Ecofriendly energy saving soft flow fabric dyeing machine is a flat-width dyeing machine combining intermittent and continuous. Mainly composed of padding machine and heating and insulation room. The padding mill consists of a rolling mill and a rolling tank. There are two types of rolling mills: two rolls and three rolls. The rolls are arranged up and down or left and right, and the pressure between the rolls can be adjusted. After the fabric is immersed in the rolling tank, it is pressed by the rolling rolls, and the dyeing liquid penetrates into the interior of the fabric, and the excess dyeing liquid still flows into the rolling tank. The fabric enters the thermal insulation chamber and is wound into a large roll on the winding roller, and is slowly rotated and stacked for a certain time under the hot and humid conditions, so that the dye is gradually dyed to the fiber. This equipment is suitable for flat-panel dyeing in small batches and varieties.