The position of the high temperature and high pressure dyeing machine needs to be determined during the installation process, but before installing the dyeing machine, it is possible to reserve space for equipment maintenance and operation, which is convenient for future operation and maintenance. The high temperature and high pressure dyeing machine needs equipment. Mount it on a relatively flat foundation and then secure it with the screws on the foot.
In the process of installing the dyeing machine, the high temperature and high pressure dyeing machine can effectively use the instrument to check the levelness of the equipment. If the level is not enough, it must be accurately positioned to install, and the three-phase four-wire in the dyeing machine can be used. The power supply is placed entirely inside the equipment's electrical box.
For the whole process of installation of high temperature and high pressure dyeing machine, the equipment must be grounded accordingly to ensure the safety of equipment installation and use. When preparing the dyeing solution, first adjust the dye to a slurry with a small amount of cold water, then dilute it with room temperature water. Note that the temperature of the diluted water should not be too high, higher than 60 degrees, the dyed quilt is destroyed, and the dye is removed. In addition to the modulation, it can also be prepared by the dusting method, that is, the dye is slowly sprinkled into the cold water under high-speed stirring, and it is not suitable for a long time after the dye bath is prepared. Stirring with a stirrer is required to prevent precipitation.