Ultra Low Bath Ratio Energy Saving Dyeing Machine

TH-LA-B Series Ultra Low Bath Ratio Energy Saving Dyeing Machine
Under the influence of energy, environmental protection and processing costs, the printing and dyeing industry is facing unprecedented pressure. In order to meet the increasing demand of material civilization for textiles and reduce energy consumption and pollution at the same time, it is the primary problem that must be considered in the sustainable development of printing and dyeing. Therefore, printing and dyeing enterprises must take the road of technological development and progress, eliminate the traditional out of stage equipment, and adopt advanced technology and equipment with high efficiency and energy saving characteristics.

After a long time of research and demonstration, on the basis of TH-LA series machines, the team of the Tonghua has successfully designed and developed a knitted fabric omni-directional machine with slide type fabric storage structure, which can greatly reduce the water consumption, greatly reduce the bath ratio, and prevent the fabric from being crushed and wrinkled; besides, it is easy and convenient to operate, short process design, and built-in fabric pipe.

Main Parameters
*Machine type: long cylinder
*Design pressure: 0.44Mpa
*Maximum working pressure: 0.4MPa
*Design temperature: 140 ℃
*The maximum working temperature is 135 ℃
*Heating rate: about 35 minutes at 20 ℃ ~ 130 ℃ (saturated vapor pressure is 0.7MPa)
*Cooling rate: 130 ℃～ 80 ℃ for 25 minutes (cooling water pressure is 0.3MPa) cooling water temperature: 5 ℃～ 10 ℃
*Bath ratio: as low as 1:4-5

Main Features
* The bath ratio can be as low as 1:4-1:5.
* Large capacity, capacity can increase 50% yield on the original basis.
* Easy to produce creases, cloth can be less than a predetermined type, saving cost.
* The energy consumption per ton of cloth is low (save 50% of water, electricity, steam and additives on the original basis).
* Built in composite variable diameter cloth guide: it can minimize the tension and effectively remove the warp crease.
* Overflow and jet nozzles are available: suitable for dyeing of high-grade fabrics with cloth weight from 50 to 600 g / m2.
* The machine height is low, the tension is low, the shrinkage after dyeing is small, and the weight of finished product is easy to achieve.
* Simple operation and maintenance.