In order to ensure that the HTHP Rapid Jet Dyeing Machine can maintain a stable working state, the fabric must be slowly and smoothly operated for 3 to 5 minutes after the dyeing machine is fed, and then the door is closed. It is necessary to adjust the parameters on the equipment according to the changes of different processing types to avoid the phenomenon of jamming.
That is to say, the dyeing is carried out in strict accordance with the operating procedures of the high temperature and high pressure rapid jet dyeing machine. When the type of processing changes, the equipment such as the return valve and nozzle should be adjusted in time. After the fabric enters the machine, it must be slowly operated for 3 to 5 minutes before closing the door and feeding dyeing.
For some light and high-density fabrics, that is, fabrics that do not sink in the dye bath and are easy to float on the liquid surface, work hard to formulate techniques and determine dyeing prescriptions, to avoid the occurrence of traffic jams, such as adopting a full overflow method, and Add deaerator and so on in the dye bath.
In the dyeing process, pay attention to check whether the machine is in a jamming scene. Once found, the recoil and plugging device can be activated to remove the jam. To avoid the increase of foam in the dye bath, you can add decontamination and soft water in the dye bath.
https://www.tonghuadyeingmachine.com/
