The high temperature and high pressure fast dyeing machine needs to determine the installation position during the installation process, but it is necessary to reserve the space for equipment maintenance and operation before installing the dyeing machine, which can facilitate the operation and maintenance in the future. The dyeing machine should be installed in the installation. On a relatively flat foundation, then use the screws on the anchor to fix it. In the process of installing the dyeing machine, it is best to use the instrument to check the level of the equipment. If the level is not enough, Must be identified to install.
The high-temperature and high-pressure fast dyeing machine can put the three-phase four-wire power supply in the electric wire box of the equipment during operation. For the whole process of high-temperature and high-pressure dyeing machine installation, the equipment must be grounded accordingly to ensure the equipment. Safe to install and use.
The high-temperature and high-pressure rapid dyeing machine is basically made of stainless steel when it is operated. Its equipment has the advantages of simple speed regulation and no noise in speed regulation. It is more suitable for processing cotton, blended seamless underwear, hemp and silk. , rayon and stockings and other materials. The paddle mainly presents the mixing of the dyeing liquid in different directions in the positive direction, so that the staining can be presented as a floating dyeing state, the whole dyeing is also very uniform and the penetrating force is relatively strong, and no damage is caused to the staining.