Dehydration process carried out in gas-liquid dyeing machine

At present, after the dyeing and washing process of the gas-liquid dyeing machine is completed, the fabric needs to be discharged into the next dewatering process, dewatered by a special dehydrator, and then subjected to a process of opening and setting. Since the dewatering process requires not only special dewatering equipment, but also dehydration staff. Therefore, the whole line dyeing and finishing process is low, the production efficiency is low, and the production cost is greatly increased.
 
In order to simplify the dehydration process of the gas-liquid dyeing machine and reduce the cost, the dehydration process carried out in the equipment is carried out using the structural characteristics of the gas-liquid dyeing machine. The specific method is to keep only the operation of the circulating fan and the lifting roller, and let the fabric run dry, and at the same time, the manual operating hole on the master cylinder and the exhaust hole on the circulating air duct are in an open state, and can be controlled by controlling the running time. The moisture content required for the subsequent shaping process of different fabric types.
 
In this way, the existing gas-liquid dyeing machine can be fully utilized, the process flow is simple, the production efficiency is high, and the subsequent production cost can be greatly reduced. This dehydration process will be widely used in the dyeing process to speed up the overall dyeing efficiency.

https://www.tonghuadyeingmachine.com/