The installation position of the HTHP rapid dyeing machine is determined. Before installing the dyeing machine, it is better to reserve the space for equipment maintenance and meta-turning during the operation, so that the operation and maintenance of the lake can be facilitated. The dyeing machine should be installed on a relatively flat foundation and then fixed with the screws of the anchor. During the installation of the dyeing machine, it is best to use the instrument to check the level of the equipment. If the degree is not enough, you must find it before you can install it.
The high-temperature and high-pressure fast dyeing machine is basically made of stainless steel. The equipment has the advantages of simple speed regulation and no noise in the speed regulation. It is more suitable for processing cotton, blended seamless underwear, hemp, silk and rayon. And stockings and other materials. The blade mainly presents the mixing of the dye liquor in different directions in the positive direction, so that the staining can be presented as a floating dyeing state, the whole dyeing is also very uniform and the penetration is relatively strong, and no damage is caused to the staining.
Because the high temperature and high pressure fast dyeing machine is suitable for bleaching, washing, dyeing and scouring garments such as acrylic, woolen sweaters and cotton sweaters, of course, it can also be used for bleaching and dyeing of daily necessities such as socks, gloves and towels. A wide range of bleaching and dyeing equipment, and the dyeing machine can also automatically perform timing and complete the positive and negative cycle mixing work. Even a small dyeing machine can perform dyeing of three different color samples at one time.
https://www.tonghuadyeingmachine.com/
