The textile sample dyeing machine is made of all stainless steel casing, which is beautiful and durable, beautifully designed, saves the place, adopts electric heating method, uses glycerin as medium, does not need to increase the pressure inside the machine at 140 °C, and has a heat selection button. Adjusting the heating amount from 1~6KW, providing 6 kinds of opening temperature rate (about 1~6/min), automatic constant temperature timing system, accurate control of the constant temperature process up to 166 minutes.
Textile sample dyeing machine should pay attention to the following aspects when using lubricating oil
1. The volume of the textile sample dyeing machine and the volume of the fuel tank are small, the amount of lubricating oil installed is also small, and the oil temperature is high during operation, which requires the lubricating oil to have good thermal stability and oxidation resistance.
2. Because the environment of the mine is bad, coal dust, rock dust and water are more, the lubricating oil is inevitably contaminated by these impurities, so the lubricating oil should have better anti-rust, anti-corrosion and anti-emulsification properties; When it is contaminated, its performance will not change too much, that is, it is less sensitive to pollution.
3. The temperature of the open-air textile sample dyeing machine varies greatly in winter and summer. In some areas, the temperature difference between day and night is also large. Therefore, the viscosity of the lubricating oil is required to change with temperature. It is necessary to avoid the viscosity of the oil becoming too low when the temperature is high. The lubricating film cannot be formed, and the lubricating effect should not be achieved, and the viscosity should be too high when the temperature is low, so that starting and running are difficult.
4, the lubricant is required to adapt to the seal, so as to avoid damage to the seal, interlocking function.
https://www.tonghuadyeingmachine.com/
