The HTHP gas-liquid dyeing machine mainly adopts the structural design method in the process of production. To a certain extent, it is necessary to ensure that the grey cloth can be operated at a high speed under a low tension state, and also equipped with a cloth. The impact point of the blank not only can effectively ensure the orderly stacking of the fabric in the whole dyeing tank, but also can avoid the phenomenon of dyeing and folding to a large extent, and the cloth blank can be improved in the bulkiness and the hand feeling.
The high temperature and high pressure jet dyeing machine is designed with special anti-vibration baffle to ensure that the dyeing cloth does not rotate during the whole running process, ensuring the uniformity of the whole coloring. The nozzle used can be carried out on the gap. Adjustment, according to the actual production situation, the cloth can be adjusted at will, effectively achieving full-jet dyeing or semi-jet dyeing.
The dyeing cylinder of the high-temperature and high-pressure jet dyeing machine has a special internal mesh design on the main body to ensure smooth dyeing even when dyeing high-density fabrics. It can be equipped with fully automatic simulating liquid. , as well as the system of feeding and temperature control, the degree of the dyeing cylinder is relatively poor.
High temperature and high pressure jet dyeing machine installation maintenance and maintenance
(1) Install, use and maintain the machine in strict accordance with the requirements of the equipment factory.
(2) The fan must be installed firmly to prevent vibration from causing a series of problems.
(3) The compressed air quality must be good, the air pressure is not less than 5kg/cm2, and the water content and oil content are low.
(4) Electric boxes and computer cabinets must be waterproof and moisture-proof, and ventilation should be good.
https://www.tonghuadyeingmachine.com/
