The location of the installation of the high temperature rapid dyeing machine is determined, but before installing the dyeing machine, it is better to reserve space for equipment maintenance and operation for future operation and maintenance. The dyeing machine should be installed on a relatively flat foundation, then Use the screws on the anchor to fix it. In the process of installing the dyeing machine, it is best to use the instrument to check the level of the equipment. If the level is not enough, you must find it before you can install it. It is good to put the three-phase four-wire power supply in the dyeing machine, and place it in the electric box of the equipment. For the whole process of high-temperature and high-pressure dyeing machine installation, the equipment must be grounded accordingly to ensure the installation and use of the equipment. Safety.
The high temperature rapid dyeing machine is basically made of stainless steel. The equipment has the advantages of simple speed regulation and no noise in the speed regulation. It is more suitable for processing cotton, blended seamless underwear, hemp, silk and rayon. And stockings and other materials. The blade mainly presents the mixing of the dye liquor in different directions in the positive direction, so that the staining can be presented as a floating dyeing state, the whole dyeing is also very uniform and the penetration is relatively strong, and no damage is caused to the staining.
The high-temperature fast dyeing machine is suitable for bleaching, washing, dyeing and scouring garments such as acrylic, sweater and cotton sweaters. It can also be used for bleaching and dyeing of daily necessities such as socks, gloves and towels. A wide range of bleaching and dyeing equipment is used, and the dyeing machine can automatically perform timing and complete the reverse mixing work. Even a small dyeing machine can perform dyeing of three different color samples at one time.