The rapid jet dyeing machine has a small footprint and high yield during use, which saves materials, power and labor to a certain extent. It has not only high temperature and high pressure, but also atmospheric pressure. It can be used not only for synthetic fibers but also for natural fibers. It can be used not only for dyeing but also for pre-treatment. Because of its versatility, it is more popular with manufacturers.
In the process of working, the rapid jet dyeing machine needs to inject the U-shaped tube into the dyeing liquid, and the dyeing liquid is extracted from the middle of the U-shaped tube through the circulating pump, heated by the heat exchanger, and then ejected by the top nozzle, and the liquid ejection force in the nozzle is sprayed. Under the push, the fabric circulates inside the tube to complete the dyeing. Since the spraying action of the dyeing liquid contributes to the penetration of the dyeing liquid into the interior of the rope-like fabric, the dyeing bath ratio is also small, and the tension of the fabric is smaller, thereby obtaining a dyeing effect superior to that of the overflow dyeing machine.
The fuselage of the rapid jet dyeing machine and all the parts in contact with the dyeing liquid are made of high corrosion-resistant stainless steel. When used, the high-efficiency stainless steel centrifugal pump is used. The main pump is controlled by the soft start control, and the lifting roller is driven by the inverter control motor. Pneumatically controlled heating and cooling valves with humidity control.