U-type fabric dyeing machine has a variety of textile fibers, such as loose fibers, yarns, woven fabrics and knitted fabrics. They have various production methods and process requirements in the dyeing process, but the basic processing methods. There are padding, water washing, drying, steaming and high temperature processing, which proves that the U-type fabric dyeing machine has strong versatility.
In order to meet the high temperature and high pressure dyeing requirements, the materials of some parts of the U-type fabric dyeing machine not only have a certain strong rigidity, but also have the necessary corrosion resistance and good heat insulation. Therefore, in addition to cast iron, carbon steel, non-ferrous metals, alloy steel, rubber, textile fiber, wood, plastic, ceramics, asbestos and fiberglass, stainless steel, synthetic rubber, polytetrafluoroethylene, MC nylon, etc. are also many The material that must be used for the part.
The location of the dyeing machine installation should be confirmed when installing the U-type fabric dyeing machine, but the space for maintenance and operation of the dyeing machine should be left out for easy operation and maintenance in the future. The dyeing machine should be mounted on a relatively firm and flat foundation and the dyeing machine should be secured with special screws for the feet.
After confirming the installation position of the U-type fabric dyeing machine, the dyeing machine is inspected using a special instrument, mainly to check whether the level is in compliance with the requirements. If the level is not correct, it needs to be corrected before installation. It is also necessary to place its three-phase four-wire power supply line in the machine-specific power box.